Elitesofabric
SOLID-COLOR UPHOLSTERY VELVET
Plain Velvet Sofa Fabric
Model: PV-220
A 100% polyester warp-knitted plain velvet developed for sofa, sectional, lounge-chair, and fixed upholstery production. The 150 cm width and 220 GSM base specification gives furniture factories a clear starting point for costing, sampling, cutting, and solid-color bulk orders.
- Composition100% Polyester
- ConstructionWarp-Knitted Velvet
- Usable Width150 CM
- Fabric Weight220 GSM
- Minimum Order1,000 M Per Color
- Color DevelopmentPantone Lab Dip
SPECIFICATION DECISION
Choose The Right Weight And Backing For The Sofa Build.
Choose the base cloth or a backed version by the furniture construction, not by weight alone.
| Supply Option | Effect On Production | Best Fit |
|---|---|---|
| 220 GSM Base Velvet | Softer drape, lower delivered weight, and easier shaping around tailored upholstery. | Residential sofas, cushions, and chair panels after a seam and foam trial. |
| Backed Or Functionally Finished Velvet | More body and panel support, with a change in hand feel, sewing behavior, and final weight. | Large panels, higher seam stress, or furniture programs needing added dimensional support. |
Recommendation: Approve the exact fabric and backing combination with the intended foam, seam, and edge construction. A base-cloth approval does not transfer to a backed version.
COLOR AND LOT CONTROL
Lock The Color Lot Before Production And Reorders.
Lock the color, nap, width, weight, and finish before bulk release, then retain the same standard for replenishment.
- DefineSet the Pantone target, intended lighting, fabric face, and nap direction.
- Lab DipReview the dyeing lab dip prepared in 2-4 working days.
- FreezeSeal a production-representative swatch with color, 150 cm width, 220 GSM weight, backing, and finish recorded.
- ProduceRun the 20-25 day bulk production plan and label every roll by color, dye lot, roll number, and length.
Recommendation: For a repeat order, compare the new lot with the sealed master under the same light and nap direction before mixing rolls in one furniture program.
PRODUCT PHOTOS
Review The Product Surface From Practical Swatch Views.
Use the swatch views to compare pile direction, surface texture, drape, cut edge, and color under the lighting used for sample approval.
COMPLETE SPECIFICATIONS
Compare The Full Supply Specification.
The base specification records the product, construction, width, weight, test options, traceability, and packing in one buyer-ready table.
| Product Name | Plain Velvet Sofa Fabric |
|---|---|
| Model | PV-220 |
| Product Category | Plain Solid-Color Velvet For Sofa Upholstery |
| Usable Width | 150 CM |
| Width And Weight Control | Compared With The Approved Sample And Purchase Specification |
| Fiber Content | 100% Polyester |
| Supply Form | Roll Goods For Cutting, Sewing, Stapling, And Fixed Upholstery Assembly |
| Order Test Options | ISO 12947-2 Abrasion, ISO 12945-2 Pilling, And ISO 105-X12 Rubbing Colorfastness |
| Roll Traceability | Color, Dye Lot, Roll Number, Length, And Inspection Status |
| Packaging | Tube Roll With Inner Film And Outer Woven Protective Bag |
APPLICATIONS & EQUIPMENT
Match The Fabric To The Furniture Program.
The plain pile suits repeatable solid-color upholstery programs when the furniture construction, seam, foam, and nap direction are approved together.
Sofas And Sectionals
For seat, back, arm, and fixed-frame panels where the same nap direction is maintained across adjoining pieces.
Lounge And Accent Chairs
For tailored residential and hospitality seating after the approved swatch is tested with the intended foam, seam, and edge construction.
Furniture OEM And Upholstery Converters
For roll-based solid-color programs that require Pantone development, batch labels, repeatable width and weight, and export packing.
MATERIALS & MANUFACTURING
Construction, Color, And Finish Options.
Keep fiber content, knitted construction, dyeing, pile finish, and any added backing as separate specification lines so each production version remains comparable.
Fiber Content
100% polyester face fabric.
Manufacturing Route
Warp knitting followed by solid dyeing, finishing, inspection, and roll packing.
Pile And Finish
Plain directional velvet pile with optional backing and functional finishes developed through sample approval.
PERFORMANCE & WORKING CONDITIONS
Define The Upholstery Operating Window.
The product specification controls what is supplied; the furniture trial controls how that fabric performs with the selected seam, foam, panel shape, and care method.
CUSTOMIZATION
Customization For Furniture And Distribution Programs.
Define every change against one approved construction so color, backing, finish, packing, and order quantities remain controlled.
- Color Development: Pantone-referenced solid colors with a 2-4 working-day lab-dip cycle.
- Backing Options: Bonded or reinforced backing developed on a representative sample to add body or panel support.
- Functional Finishes: Finish options are sampled with the target color, pile, hand feel, and care method before bulk release.
- Roll And Label Format: Roll length, core, inner film, outer bag, private label, and carton marks can be set in the order specification.
- Quality File: Approved swatch, color target, width, GSM, roll number, and lot inspection criteria are linked to the order.
- Commercial Boundary: The standard MOQ is 1,000 m per color; custom backing or finish may require a separate setup quantity and lead-time allowance.
USE & SAFETY INSTRUCTIONS
Handle The Nap Correctly From Cutting To Cleaning.
Directional cutting, a representative seam trial, gentle pile care, and protected roll storage prevent the most common appearance and lot-control failures.
Approve The Swatch And Lot Standard
Compare color, pile direction, hand feel, width, 220 GSM weight, backing, finish, and face appearance under one agreed light source. Seal the accepted piece as the master for production and replenishment.
Cut Every Panel With One Nap Direction
Mark the roll direction before cutting and keep seat, back, arm, and cushion panels aligned. Allow about 10-20% directional cutting waste in the upholstery layout instead of rotating panels to save fabric.
Sew And Upholster With A Trial Panel
Test the selected needle, thread, stitch density, seam allowance, foam, piping, stapling tension, and edge shape on a representative panel. Release production only when the seam lies flat and the pile recovers without permanent marking.
Clean And Store The Pile Without Crushing
Vacuum with a soft upholstery attachment in the nap direction, blot spills without rubbing, and follow the sewn-in care code. Store rolls dry, wrapped, elevated, and protected from direct sunlight, heat, moisture, and edge compression.
PURCHASING CONDITIONS
Plan Samples, Bulk Production, And Delivery.
The quotation ties the selected color, finish, backing, quantity, packing, payment, port, and production window to one order specification.
- MOQ1,000 m per color
- Sample PolicyFree swatches for new clients with express freight paid in advance and refundable under the supplier's sample policy
- Sample Lead Time2-4 working days for a Pantone-referenced dyeing lab dip
- Bulk Lead Time20-25 days after order details and color approval
- Price BasisFOB Shanghai or Ningbo; quote by color, finish, backing, quantity, packing, and destination
- PackagingRoll packing on a tube with inner film, outer woven bag, and buyer label or shipping mark options
- Payment TermsL/C or T/T with 30% deposit and balance within 15 days after the copy of B/L
- Shipping SupportInternational express for samples; air or sea freight for bulk orders through Shanghai or Ningbo
PRE-SALES & AFTER-SALES SERVICE
Control The Approved Velvet Specification Through Reorders.
Each stage uses the same approved swatch, roll identifiers, and order specification so the buyer can trace decisions from inquiry through replenishment.
Before Ordering
Review the target use, color reference, 150 cm width, 220 GSM base, backing or finish option, quantity, packing, and destination in one quotation specification.
During Production
Keep the approved lab dip or master swatch with the production record, assign dye-lot and roll numbers, and inspect face appearance, shade, usable width, weight, and packing before shipment.
After Delivery
Use roll and lot identifiers for shortage, shade, pile, damage, or packing claims, and reference the retained sample when arranging replacement or repeat supply.
FACTORY & MANUFACTURER
Manufacturer Identity And Production Support.
The legal entity, Haining location, process scope, and order-support activities are stated separately from product-level specifications.
Haining Tuoda New Materials Co., Ltd.
Established in 2017, the company operates from NO.28 Road 8th Jingbian, Haining Warp Knitting Industry Zone, Haining City, Zhejiang Province. Production support covers warp knitting, weft knitting, dyeing, and finishing for sofa and home-textile fabric programs.
- Solid-color lab-dip and sample approval
- Warp-knitted and weft-knitted fabric programs
- Roll inspection, lot labels, and export packing
- Repeat-order records for color and specification control
CERTIFICATES & STANDARDS
Scope Certificate And Lot-Level Evidence.
Company-level scope and shipment-level product evidence are kept separate so a buyer can request the document that matches the ordered material and lot.
- GRS Version 4.0 Scope CertificateETK-00042930-GRS-2601
- Certificate Period2026-01-29 To 2027-01-28
- Certificate ScopePrinted And Dyed Knitted Fabrics Within The Listed Appendix
- Shipment EvidenceLot-Specific GRS Claims Require A Covering Transaction Certificate
REQUEST A TECHNICAL QUOTE
Tell Us The Color, Finish, Quantity, And Destination.
Include the furniture use, Pantone reference, backing or finish, order length, packing, delivery port, and required test documents.
- Phone: 13706595350
- Email: [email protected]
- WhatsApp: 13706595350
- Address: NO.28 Road 8th Jingbian, Haining Warp Knitting Industry Zone, Haining City, Zhejiang Province
