2 Seater Recliner Sofa Fabric: Choosing the Right Material

Choose fabric for recliner sofa, and choose fabric for ordinary sofa, the idea is not the same. Cloth for double recliners such as 2 seater recliner sofa fabric, in addition to being good-looking and wear-resistant, must also be matched with the repeated opening and closing of the cushion, backrest and pedals, and cannot jam the mechanism, nor can it block the heat dissipation and wiring harness of the motor. As soon as many people come up, they ask how many meters of cloth they need for the double. In fact, before that, they have to see the structure and real size of the machine clearly.

First see what kind of recliner this is

Reclining chairs and sofas are generally divided into two types: dynamic and electric. The manual ones are driven by pulling the handle or pushing the back, the electric ones are driven by motors to expand and contract, and some are equipped with heating, adjustable headrests or folding beds. For sofas with motor or heating function, the power must be cut off according to the manufacturer's requirements before changing the cloth, and the wiring harness, switches and moving parts must be protected. Fabric construction cannot replace equipment maintenance. choose cloth for the 2 seater electric recliner sofa fabric this kind of double electric recliner, especially pay attention to the position of the motor and the pedal, the cloth should leave a movable margin in these places, and the seam should not be pressed on the switch and the access hole.

The cloth change must not interfere with movement, heat dissipation and wiring harness

For sofas with recliner mechanism, folding bed, adjustable headrest, heating or electric module, changing cloth cannot hinder its movement and heat dissipation, nor can it block the position of wiring harness, switch, lock and maintenance. If the fabric is piled too thick, or if the wire harness and switch are sewn into the seam, the problem will be buried. 3 seater power recliner sofa fabric usually has several groups of independent moving parts, with more interfaces and joints than double positions. during construction, each place should reserve space for the whole stroke of the mechanism. after completion, each recliner unit should be opened and closed 1 times to make sure that there is no seating or pulling.

Double, three and four, the difference is not just size

2 seater sofa recliner fabric, 3 seater recliner sofa fabric, 3 seater sofa recliner fabric, and 4 seater sofa recliner sofa fabric. The number of armrests, backrests, seat cushions, deep buckles and module structures should be measured item by item. The words "several people" alone cannot calculate the responsible dosage. The four-seat 4 seater recliner sofa fabric has a larger span. The seams and synchronous movements between multiple recliner units should be considered separately, and the two-seat arrangement cannot be moved directly.

How to calculate the dosage, don't pat your head according to several positions

The amount of cloth change should be calculated together with the size of each piece, available width, laying direction, seam and edging allowance, pattern circulation, floral position, velvet direction and loss. It is not possible to give a common size according to a few sofa seats. 1 yard is exactly equal to 0.9144 meters, and the original unit is retained during conversion. The seat surface, front edge and the outside of the armrest are the places where the friction is heaviest. The cutting direction and joints of these parts should be specially arranged and lined when necessary.

What indicators does the fabric itself look at

The recliner is often opened and closed, and the fabric is repeatedly stressed at the bending place. Wear resistance, pilling and seam slippage all depend on it. Moreover, the stress on the seat surface, backrest and pedal is different, so the whole sofa cannot be summarized by a wear-resistant number. The results of different test systems cannot be directly converted. For example, Wyzenbeek and Martindale are two sets of methods, and numbers cannot be directly compared with high and low. Polyester such fibers have low moisture absorption, quick drying and wrinkle resistance, but 100% polyester only indicates the fiber content, which does not mean that wear resistance or pilling resistance must reach the standard, but should fall on the test data of specific models. The thickness should also be controlled. If the fabric, backing and lining are stacked too thick, it will affect the gap between the folding angle, card strip, zipper and movable mechanism, and instead jam the movement.

The structure of the machine, the real size and the test data are all sorted out, and then the fabric is picked out. The selected fabric not only fits the recliner, but also can withstand repeated opening and closing.