Beige Color Sofa Fabric: How To Choose The Right Shade

After the beige sofa is put into the living room, the most common drop is not “the color is not good-looking”, but it is different from the screen picture, the color card sample or the impression under the lighting of the exhibition hall. Yellow, gray, pink, higher or lower lightness may be collectively referred to as beige. In the face of beige color sofa fabric, don’t rush to discuss which 1 is more advanced, and make clear the color to be accepted first.

Turn Beige into a Confirmatory Color First

It is not enough to write “beige” in the purchase description. At a minimum, the hue tendency, lightness and chroma shall be confirmed, and the color number, approved standard sample or batch sample shall be used as the basis for delivery. The same name covers a wide range of colors, there is no physical benchmark, and the supplier and purchaser may each understand it correctly, but end up with different results.

When inspecting the sample, don’t just focus on a small color swatch. The sample should preferably show true texture and color distribution; if the fabric has a velvet or obvious direction, it should be observed from different directions. Suede in the light and viewing direction will appear after the change of depth and gloss differences, this visual change is not necessarily inconsistent dyeing, but will directly affect the perception of the entire sofa.

Bring the Sample into the Lighting Where the Sofa Will Be Placed.

The same beige fabric may show different shades under daylight, warm and cool lights. When comparing candidates, look once under near-daylight conditions and once under the artificial lighting actually used in the room, and place the samples next to walls, floors and wood finishes. Whether the beige is coordinated depends on its relationship with these fixed materials, rather than looking at the color card in isolation.

You also need to change the sample’s position. Spread it on the horizontal seat surface, stand on the backrest, and then observe it close to the curved armrest. The appearance of color and texture varies depending on the direction of the incident light and the surface. For corner sofas or multi-piece furniture, do not approve the effect of only one cushion; Adjacent planes, modules, cutting direction and velvet direction should be checked uniformly.

The Color Has Passed, but the Fabric Has Not yet Passed

Beige is an appearance characteristic, not a material or quality grade. Two fabrics that look close may be completely different in fiber composition, yarn morphology, woven or knitted structure, backing, coating and finishing. The procurement data should continue to indicate the specific end use, composition, structure, width, mass per unit area, proposed use, maintenance instructions and restrictions.

The household high-frequency seat surface is more concerned about wear resistance, pilling, seam stability, color fastness to rubbing and appearance maintenance after cleaning; the use load of the backrest or decorative pillow cannot replace the seat surface judgment. If the supplier claims that the fabric is easy to clean, stain-resistant or suitable for high-frequency use, the conditions, methods, results and scope of application of the corresponding tests should be obtained. Don’t use a marketing name, and don’t just replace the whole set of judgments with a single wear-resistant number.

Practice Addressing Maintenance Issues with Light-Colored Items in Advance

Light beige is often more likely to show dark stains, liquid marks, seam shadows or foreign dye migration, but dark color does not mean more stain resistant. Whether the stain is obvious is also related to the gloss, texture, pattern, lint direction and cleaning residue of the fabric. A more reliable approach is to select the dirt that is really likely to be encountered in the home and compare it with the same residence time and allowable cleaning methods on the candidate samples.

A flat, tight, lush surface is usually easier to remove particles; loops, long fleece, or deep texture can hide dirt, and cleaning tools can cause hooking. However, the surface looks flat and does not automatically prove washable. Fixed coated sofas are also limited by backing, adhesive layer, foam and wooden frame, and removable covers can only be washed according to the prescribed procedures after clear verification.

Resolve the Dispute with the Approved Sample

The final decision should not be just the 1 sentence “choose this beige”. Record the actual color sample, batch, front and back, velvet direction, texture, allowable color difference, nursing method and application position. Try to unify the batch and roll number of the same set of furniture; For batch items, the first piece can be made first, and the color relationship on the seat surface, backrest, armrest, joint and curved surface can be checked before approval to continue production.

Make a very simple check for the last time before placing an order: under the main lights of the living room during the day and night, put large enough batches of samples on different parts of the sofa and compare them with the walls, floors and wood finishes at the same time. Only the color, structure, performance evidence and maintenance conditions can be confirmed, this beige fabric is really selected.